OVERLAP POOL LINERS: On this type of pool, the pool liner goes up and over the top lip of the pool wall. It then comes down over the edge on the outside of the pool. This type of pool liner is normally secured with some sort of clamping method that holds it in place. Any adjustment that may be needed on the wall height of the pool liner is made by removing the lamp(s) and either letting in or pulling out more of the liner.

BEADED POOL LINERS: Beaded pool liners come in 2 sizes, 48″ & 52″ wall heights. If there is any height adjustment that needs to be made, this needs to be done by removing or building up the height of the “cove” located at the base of the pool wall within the pool. Cove is available in “wedge” shaped Styrofoam or sand can be used by compacting it into the corner where the wall meets the floor.

UNIBEAD J-HOOK POOL LINERS: Uni-bead or J-Hook pool liners have a upside down J, and just hooks on the top side of the pool wall. J-Hook pool liners can also be cut to be used as a beaded receiver